Document and Data Control in ISO 9000 & ISO 14001

The organization shall establish and maintain procedures for controlling all documents and data required by ISO 9000 & ISO 14001

a) they can be located;

b) they are periodically reviewed, revised as necessary, and approved for adequacy by authorized personnel;

c) current versions of relevant documents and data are available at all locations where operations essential to the effective functioning of the OH&S system are performed;

d) obsolete documents and data are promptly removed from all points of issue and points of use, or otherwise assured against unintended use;

e) archival documents and data retained for legal or knowledge preservation purposes, are suitably identified.

Accidents, incidents, non-conformances and corrective and preventive action

The organization shall implement and record any changes in the documented procedures resulting from corrective and preventive action.

Documents required by the ISO 9000 & ISO 14001 shall be controlled. Records are a special type of document and shall be controlled in accordance with the requirements.

The organization shall establish, implement and maintain procedure[s] to:

a) approve documents for adequacy prior to use;

b) review and update as necessary and re-approve documents;

c) ensure that changes and the current revisions status of documents are identified;

d.) ensure that relevant versions of applicable documents are available at points of use;

e.) ensure that documents remain legible and readily identifiable;

f.) ensure that documents of external origin determined by the organization to be necessary for the planning and operation of the ISO 9000 & ISO 14001 management system are identified and their distribution controlled, and

g.) prevent the unintended use of obsolete documents and apply suitable identification to them if they are retained for any purpose.

Why do organizations implement ISO 9000 systems?

Why do organizations implement ISO 9000 systems?

More often than not, organizations get ISO 9000 because certain customers force them or encourage them to. In many market sectors—electronics, pulp and paper, telecommunications, automobile manufacturing, defense—major customers have mandated ISO 9000 registration to their key suppliers. Similarly, some overseas regulatory bodies mandate ISO 9000 for the makers of qualitysensitive products (such as medical devices).

Many of these major customers impose ISO 9000 systems in place of, or in addition to, specific quality programs, requirements, specifications, and so on that have been in place for many years. The ISO 9000Standard becomes a key part of the relationship between the customer and its suppliers.

ISO 9000 is not, however, meant to replace customer-specific requirements in any market segment. Rather, ISO 9000 is meant to be a floor: a basic set of generic requirements. They are generic enough to apply to virtually all supplier/customer relationships anywhere in the world. It matters not the size of the supplier, the location of the customer, or the nationalities involved.

In some industrial segments, formalized standards have been created, adding to the generic ISO 9000requirements additional clauses that are industry specific. Examples include:

_ Automotive (QS-9000).

_ Aerospace (AS-9000).

_ Telecommunications (TL-9000).

To the extent that ISO 9000 replaces customer-specific quality programs and supporting audit/oversight activities, it can relieve both customers and suppliers of a great deal of redundancy, duplication, and waste of resources. The fundamental requirements are understood, agreed to, and (usually) confirmed by objective third-party audit. This gives customers confidence in the integrity and effectiveness of their supplier’s basic quality practices. The customer and supplier can then invest their energies and resources in agreeing to and working on the specific requirements unique to their relationship.

To some, ISO 9000 sounds like a mandatory, gun-to-your-head, my-way-or-the-highway program. For many suppliers, it is exactly that (“get ISO 9000 or get lost”). For many others, it is perceived that way:

“They’re trying to tell us how to run our businesses.”

But the goal of ISO 9000 is not to strengthen customers’ control over how their suppliers run their businesses. The goal is to give customers confidence in the ability of suppliers to meet their needs, resulting in satisfied customers, and growing and prosperous suppliers.

Admittedly, implementing ISO 9000 does not guarantee this. Like most things, what you get out of it depends on what you put into it. You can implement a compliant ISO 9000 system that is all cost and no benefit and it’s even possible to pass registration audit this way. This happens, usually, when the supplier’s approach is to try to:

_ Squeak by.

_ Do just enough to get registered.

_ Get this thing done without changing how we work.

But suppliers who implement ISO 9000 fully—to the spirit, as well as the letter—can and do achieve real benefits.

Integrating Management Systems Within The ISO 9001 Standards

Today’s free market economies increasingly encourage diverse sources of supply and provide opportunities for expanding markets. Fair competition needs to be based on identifiable, clearly defined common references that are recognised from one country to the next. A standard, internationally recognised, developed by consensus among trading partners, serves as the language of trade. The International Organisation for Standardisation (ISO) has developed around 8?700, mostly technical related standards on this basis. Standards Series such as ISO 9000, ISO 14000 and what is to be known as ISO 18000 and ISO 26000 are Management related. These standards contain generic guidelines for Management Systems in the area of Quality, Environment, Occupational Health & Safety and Human Resources.

ISO is a word derived from the Greek isos, meaning “equal”. ISO 9000 Standards are developed and updated by the International Organisation for Standardisation which has around 150 member bodies. A member body of ISO is the national body “most representative of standardisation in its country”.(eg. Germany – DIN, USA – ANSI, Australia – SAA).
More than 50 countries, as well as the European Community have adopted ISO 9000 which is recognised internationally as a benchmark for measuring quality in a trade context. Since its first issue in 1987, approximately 430?000 companies have been using ISO 9000. Being a standard coming from an organisation that is usually involved in the development of technical standards, ISO 9000 is often regarded as a document that belongs in the hands of a technician exposed to production line quality control. At a closer look, however, ISO 9000 Standard Series provide guidance in the development and application of Management Systems as well as Quality Control in Manufacturing and Administration.

ISO has been developing a number of Management System Guidelines for various aspects of business. The most recent are the ISO 14000 Environmental Management System Guidelines. This is an international standard that will affect business in the near future. ISO 14000 has been designed to integrate with ISO 9000. However, apart from international standards there are local standards a company has to comply with. To remain compliant with local standards, further manuals and/or procedures are required (eg. lifting procedure in a warehouse to satisfy Work Safety requirements). A company may have several Manuals describing its Management Systems (eg. Human Resources, Quality, Security, Health/Safety, Finances). An overall link between the systems is often missing which makes the monitoring and the assessment of effectiveness difficult. Double handling of information, contradicting instructions, high maintenance costs, administrative excess and lack of overall transparency are common results.
ISO 9000 Standard Series for Quality (of) Management Systems provide generic guidance for the development of an overall Management System, ISO 14000 provides guidance for Environmental Management, etc. Transparency and monitoring of all business activities can be achieved by integrating all systems into one.
Complaints that ISO 9000 is paralysing operations and, that it does not reflect reality are usually a result of not clearly understanding how the standard can be properly structured to address the needs of a company. ISO 9000 can be structured by focusing on “best practice” process rather than the standard, by fitting the standard to the process and not the process to the standard. Having recognised this, ISO has been working on a new structure for ISO 9000, called “Vision 2000?, taking a process orientated approach to ensure that “best practice” as well as several standards can be addressed within one system. Focusing on process allows the development of a practical “working document”, providing an effective management tool. Having learned from the past, the trend to Process Orientated Management Systems started about three years ago in Europe and is finding increasing approval from certification bodies.Every company has its own culture and key individuals.
The business environment influences processes in certain ways (eg. employee market, laws, infrastructure, client, etc.)
To ensure competitiveness a company needs to ensure adequate flexibility in their system to effectively respond to changes in the business environment.
An effective system is a lean system that incorporates all necessary functions, controls of activities and “best practice” without being caught up in detail.
An effective system must also be flexible enough to enable the proper controls on outsourcing and sub-contracting of activities (eg. production, administration, service, etc.)

Why is ISO 9000 Important?

ISO 9000 is important because of its orientation. While the content itself is useful and important, the content alone does not account for its widespread appeal.
ISO 9000 is important because of its international orientation. Currently, ISO 9000 is supported by national standards bodies from more than 150 countries. This makes it the logical choice for any organization that does business internationally or that serves customers who demand an international standard of excellence.
ISO is also important because of its systemic orientation. We think this is crucial. Many people wrongly emphasize motivational and attitudinal factors. The assumption is that quality can only be created if workers are motivated and have the right attitude. This is fine, but it doesn’t go far enough. Unless you institutionalize the right attitude by supporting it with the right policies, procedures, records, technologies, resources, and structures, you will never achieve the standards of quality that other organizations seem to be able to achieve. Unless you establish a quality attitude by creating a quality management system, you will never achieve a world-class standard of quality.
Simply put, if you want to have a quality attitude you must have a quality system. This is what ISO recognizes, and this is why ISO 9000 is important.

ISO 9000 vs Quality

ISO 9000 was conceived to bring about an improvement in product quality. It
was believed that if organizations were able to demonstrate they were
operating a quality system that met international standards, customers would
gain greater confidence in the quality of products they purchased. It was also
believed that by operating in accordance with documented procedures, errors
would be reduced and consistency of output ensured. If you find the best way
of achieving a result, put in place measures to prevent variation, document it
and train others to apply it, it follows that the results produced should be
consistently good.

The requirements of the standard were perceived to be a list of things to do
to achieve quality. The ISO co-ordinator would often draw up a plan based on
the following logic:
1. We have to identify resource requirements so I will write a procedure on
identifying resource requirements
2. We have to produce quality plans so I will write a procedure on producing
quality plans
3. We have to record contract review so I will write a procedure on recording
contract reviews
4. We have to identify design changes so I will write a procedure on identifying
design changes

The requirements in the standard were often not expressed as results to be
achieved. Requirements for a documented procedure to be established resulted
in just that. Invariably the objectives of the procedure were to define something
rather than to achieve something. This led to documentation without any clear
purpose that related to the achievement of quality. Those producing the
documentation were focusing on meeting the standard not on achieving quality.
Those producing the product were focusing on meeting the customer
requirement but the two were often out of sync. As quality assurance became
synonymous with procedures, so people perceived that they could achieve
quality by following procedures. The dominance of procedures to the exclusion
of performance is a misunderstanding of the implementers. The standard
required a documented system that ensured product met specified requirements – a
clear purpose. Once again the implementers lost sight of the objective. Or was it
that they knew the objective but in order to meet it, the culture would have to
change and if they could get the badge without doing so, why should they?

Issuing a procedure was considered to equate to task completed. Unfortu-
nately, for those on the receiving end, the procedures were filed and forgotten.
When the auditor came around, the individual was found to be totally
unaware of the ‘procedure’ and consequently found noncompliant with it.
However, the auditor would discover that the individual was doing the right
things so the corrective action was inevitably to change the procedure. The
process of issuing procedures was not questioned, the individual concerned
was blamed for not knowing the procedure and the whole episode failed to
make any positive contribution to the achievement of quality. But it left the
impression on the individual that quality was all about following procedures.
It also left the impression that quality was about consistency and providing
you did what you said you would do regardless of it being in the interests of
satisfying customers, it was OK. One is left wondering whether anyone
consulted the dictionary in which quality is defined as a degree of excellence?

Another problem was that those who were to implement requirements were
often excluded from the process. Instead of enquiring as to the best way of
meeting a requirement, those in charge of ISO 9000 implementation assumed
that issuing procedures would in fact cause compliance with requirements. It
requires a study of the way work gets done to appreciate how best to meet a
requirement. Procedures were required to be documented and the range and
detail was intended to be appropriate to the complexity of the work, the
methods used and the skills and training needed. The standard also only
required work instructions where their absence would adversely affect quality.
It is as though the people concerned did not read the requirement properly or
had no curiosity to find out for themselves what ISO had to say about
procedures – they were all too ready to be told what to do without questioning
why they should be doing it.

More often than not, the topics covered by the standard were only a sample
of all the things that need to be done to achieve the organization’s objectives.
The way the standard classified the topics was also often not appropriate to the
way work was performed. As a consequence, procedures failed to be
implemented because they mirrored the standard and not the work. ISO 9000
may have required documented procedures but it did not insist that they be
produced in separate documents, with titles or an identification convention
that was traceable to the requirements.

Critics argue (Seddon, John, 2000)3 that ISO 9000 did not enable organiza-
tions to reduce variation as a result of following the procedures. It is true that
ISO 9000 did not explain the theory of variation – it could have done, but
perhaps it was felt that this was better handled by the wealth of literature
available at the time. However, ISO 9000 did require organizations to identify
where the use of statistical techniques was necessary for establishing,
controlling and verifying process capability but this was often misunderstood.
Clause 4.14 of ISO 9001 required corrective action procedures – procedures to
identify variation and eliminate the cause so this should have resulted in a
reduction in variation. The procedures did not always focus on results – they
tended to focus on transactions – sending information or product from A to B.
The concept of corrective action was often misunderstood. It was believed to be
about fixing the problem and preventive action was believed to be about
preventing recurrence. Had users read ISO 8402 they should have been
enlightened. Had they read Deming they would have been enlightened but in
many cases the language of ISO 9000 was a deterrent to learning. Had the
auditors understood variation, they too could have assisted in clarifying these
issues but they too seemed ignorant – willing to regard clause 4.20 as not
applicable in many cases.

Clause 4.6 of the undervalued and forgotten standard ISO 9000 –1 starts with
‘The International Standards in the ISO 9000 family are founded upon the
understanding that all work is accomplished by a process.’ In clause 4.7 it starts
with ‘Every organization exists to accomplish value-adding work. The work is
accomplished through a network of processes’ In clause 4.8 it starts with ‘It is
conventional to speak of quality systems as consisting of a number of elements.
The quality system is carried out by means of processes which exist both within
and across functions’ Alas, few people read ISO 9000–1 and as a result the
baggage that had amassed was difficult to shed especially because there were
few if any certification bodies suggesting that the guidance contained in ISO
9000 –1 should be applied. Unfortunately, this message from ISO 9000 –1 was not
conveyed through the requirements of ISO 9001. ISO 9001 was not intended as
a design tool. It was produced for contractual and assessment purposes but was
used as a design tool instead of ISO 9000 –1 and ISO 9004 –1.

Implementing ISO 9000 Quality Management System

Step 7. Develop quality management system documentationStep 8: Document controlStep 9. ImplementationStep 10. Internal quality auditStep 11. Management reviewStep 12. Pre-assessment auditStep 13. Certification and registrationStep 14: Continual ImprovementStep 1: Top Management CommitmentThe top management (managing director or chief executive) should demonstrate a commitment and a determination to implement an ISO 9000 quality management system in the organization. Without top management commitment, no quality initiative can succeed. Top management must be convinced that registration and certification will enable the organization to demonstrate to its customers a visible commitment to quality. It should realize that a quality management system would improve overallbusiness efficiency by elimination of wasteful duplication in management system.The top management should provide evidence of its commitment to the development and implementation of the quality management system and continually improve its effectiveness by:a. Communicating to the organization the importance of meeting customer as well as statutory and regulatory requirements,b. Defining the organization’s quality policy and make this known to every employee,c. Ensuring that quality objectives are established at all levels and functions,d. Ensuring the availability of resources required for the development andimplementation of the quality management system,e. Appointing a management representative to coordinate quality management system activities, and Conducting management review.The top management should also consider actions such as:1. Leading the organization by example,2. Participating in improvement projects,3. Creating an environment that encourages the involvement of people.This type of top management commitment may be driven by:1. Direct marketplace pressure: requirements of crucial customers or parentconglomerates.2. Indirect marketplace pressure: increased quality levels and visibility among competitors.3. Growth ambitions: desire to exploit market opportunities.4. Personal belief in the value of quality as a goal and quality management systems as a means of reaching that goal.The top management should identify the goals to be achieved through the quality management system. Typical goals may be:• Be more efficient and profitable• Produce products and services that consistently meet customers’ needs andexpectations• Achieve customers satisfaction• Increase market share• Improve communications and morale in the organization• Reduce costs and liabilities• Increase confidence in the production systemStep 2. Establish Implementation TeamISO 9000 is implemented by people. The first phase of implementation calls for the commitment of top management – the CEO and perhaps a handful of other key people.The next step is to establish implementation team and appoint a ManagementRepresentative (MR) as its coordinator to plan and oversee implementation. Its members should include representatives of all functions of the organization -Marketing, Design and development, Planning, Production, Quality control, etc.In the context of the standard, the MR is the person within the Organization who acts as interface between organization management and the ISO 9000 registrar. His role is, in fact, much broader than that. The MR should also act as the organization’s “quality management system champion,” and must be a person with:
1. Total backing from the CEO,2. Genuine and passionate commitment to quality in general and the ISO 9000 qualitymanagement system in particular,3. The dignity – resulting from rank, seniority, or both – to influence managers and others of all levels and functions,4. Detailed knowledge of quality methods in general and ISO 9000 in particular.The members of the implementation team should also be trained on ISO 9000 quality management systems by a professional training organization.
Step 3. Start ISO 9000 Awareness ProgramsISO 9000 awareness programs should be conducted to communicate to theemployees the aim of the ISO 9000 quality management system; the advantage it offers to employees, customers and the organization; how it will work; and their roles and responsibilities within the system. Suppliers of materials and components should also participate in these programs.The awareness program should emphasize the benefits that the organization expects to realize through its ISO 9000 quality management system. The program should also stress the higher levels of participation and self-direction that the quality management system renders to employees. Such a focus will go far to enlist employee support and commitment.The programs could be run either by the implementation team or by experts hired to talk to different levels of employees.Step 4. Provide TrainingSince the ISO 9000 quality management system affects all the areas and all personnel in the organization, training programs should be structured for different categories of employees – senior managers, middle-level managers, supervisors and workers. The ISO 9000 implementation plan should make provision for this training. The training should cover the basic concepts of quality management systems and the standard and their overall impact on the strategic goals of the organization, the changed processes, and the likely work culture implications of the system. In addition, initial training mayalso be necessary on writing quality manuals, procedures and work instruction; auditing principles; techniques of laboratory management; calibration; testing procedures, etc.When in-house capacity to carry out such training is not available, it may be necessary to participate in external training courses run by professional training organizations.Alternatively, an external training institution could be invited to conduct in-house training courses.
Step 5. Conduct Initial Status SurveyISO 9000 does not require duplication of effort or redundant system. The goal of ISO 9000 is to create a quality management system that conforms to the standard. This does not preclude incorporating, adapting, and adding onto quality programs already in place. So the next step in the implementation process is to compare the organization’s existing quality management system, if there is one — with the requirements of thestandard (ISO 9001:2008).For this purpose, an organization flow chart showing how information actually flows (not what should be done) from order placement by the customer to delivery to this customer should be drawn up. From this over-all flow chart, a flow chart of activities in each department should be prepared.With the aid of the flow charts, a record of existing quality management system should be established. A significant number of written procedures may already be in place.Unless they are very much out of date, these documents should not be discarded.Rather, they should be incorporated into the new quality management system.Documents requiring modification or elaboration should be identified and listed. Thisexercise is some times referred to as ” gap analysis”. During these review processes,wide consultation with executives and representatives of various unions andassociations within the organization is required to enlist their active cooperation.In the review process, documents should be collected, studied and registered for further use, possibly after they have been revised. Before developing new quality management system documentation, you need to consider with which quality requirements or department you should start. The best is to select an area where processes are fairly well organized, running effectively and functioning satisfactorily.The basic approach is to determine and record how a process is currently carried out.We can do this by identifying the people involved and obtaining information from them during individual interviews. Unfortunately, it often happens that different people will give different, contradicting versions of a process. Each one may refer to oral instructions that are not accurate or clear. This is why the facts are often not described correctly the first time around, and have to be revised several times.Once it has been agreed how to describe the current process, this process has to be adapted, supplemented and implemented according to the requirements of the quality standard (ISO 9001:2008). This requires organizational arrangements, the drawing up of additional documents and possible removal of existing documentation (e.g. procedures, inspection/test plans, inspection/test instructions) and records (e.g.inspection/test reports, inspection/test certificates).In introducing a quality management system, the emphasis is on the improvement of the existing processes or the re-organization of processes.In general, the steps to follow are the following:Ascertain and establish the following:What is the present operation/process? What already exists?
Analyze the relevant sections of the quality standard – ISO 9001:2000:What is actually required? If necessary, supplement and change operational arrangements in accordance with the standard, develop documents and records, and describe operations/processes:What is the desired operation/process?Figure 1: Steps in introducing a quality management systemThe above gap analysis can be done internally, if the knowledge level is there. Or aformal pre-assessment can be obtained from any one of a large number of ISO 9000consulting, implementing, and registration firms.Step 6. Create a Documented Implementation PlanOnce the organization has obtained a clear picture of how its quality management system compares with the ISO 9001:2008 standard, all non-conformances must be addressed with a documented implementation plan. Usually, the plan calls for identifying and describing processes to make the organization’s quality management system fully in compliance with the standard.The implementation plan should be thorough and specific, detailing:???? Quality documentation to be developed???? Objective of the system???? Pertinent ISO 9001:2008 section???? Person or team responsible???? Approval required???? Training required???? Resources required???? Estimated completion dateThese elements should be organized into a detailed chart, to be reviewed andapproved. The plan should define the responsibilities of different departments and personnel and set target dates for the completion of activities. Once approved, the Management Representative should control, review and update the plan as the implementation process proceeds.Typical implementation action plan is shown in Figure 2. Use ISO 10005:1995 for guidance in quality planning
Step 7. Develop Quality Management System DocumentationDocumentation is the most common area of non-conformance among organizations wishing to implement ISO 9000 quality management systems. As one company pointed out: “When we started our implementation, we found that documentation was inadequate. Even absent, in some areas. Take calibration. Obviously it’s necessary, and obviously we do it, but it wasn’t being documented. Another area was inspection and testing. We inspect and test practically every item that leaves here, but our documentation was inadequate”.Documentation of the quality management system should include:???? Documented statements of a quality policy and quality objectives,???? A quality manual,???? Documented procedures and records required by the standard ISO 9001:2008, and???? Documents needed by the organization to ensure the effective planning, operation and control of its processes.Quality documentation is generally prepared in the three levels indicated in the box that follows. Use ISO 10013:1995 for guidance in quality documentation.
In small companies, the above levels of documentation could be presented in one manual; otherwise, separate manuals should be prepared.A list of the documents to be prepared should be drawn up and the responsibility for writing the documents should be assigned to the persons concerned in various functional departments. They should be advised to prepare the drafts within a specific time frame.Step 8: Document ControlOnce the necessary quality management system documentation has been generated, a documented system must be created to control it. Control is simply a means of managing the creation, approval, distribution, revision, storage, and disposal of the various types of documentation. Document control systems should be as simple and as easy to operate as possible — sufficient to meet ISO 9001:2008 requirements and that is all.Document control should include:???? Approval for adequacy by authorized person (s) before issue,???? Review, updating and re-approval of documents by authorized person (s),???? Identification of changes and of the revision status of documents,???? Availability of relevant versions of documents at points of use,???? Identification and control of documents of external origin,???? Assurance of legibility and identifability of documents, and???? Prevention of unintended use of obsolete documents.The principle of ISO 9000 document control is that employees should have access to the documentation and records needed to fulfil their responsibilities.Step 9. ImplementationIt is good practice to implement the quality management system being documented as the documentation is developed, although this may be more effective in larger firms. In smaller companies, the quality management system is often implemented all at once throughout the organization. Where phased implementation takes place, the effectiveness of the system in selected areas can be evaluated.It would be a good idea initially to evaluate areas where the chances of a positive evaluation are high, to maintain the confidence of both management and staff in the merits of implementing the quality management system.The implementation progress should be monitored to ensure that the qualitymanagement system is effective and conforms to the standard. These activities include internal quality audit, formal corrective action and management review.Step 10. Internal Quality AuditAs the system is being installed, its effectiveness should be checked by regular internal quality audits. Internal quality audits are conducted to verify that the installed quality management system:
???? Conform to the planned arrangements, to the requirements of the standard (ISO 9001:2008) and to the quality management system requirements established by your organization, and???? Is effectively implemented and maintained.Even after the system stabilizes and starts functioning, internal audits should be planned and performed as part of an ongoing strategy.A few staff members should be trained to carry out internal auditing. Use ISO 19011 for guidance in auditing, auditor qualification and programmes.Step 11. Management ReviewWhen the installed quality management system has been operating for three to six months, an internal audit and management review should be conducted and corrective actions implemented. The management reviews are conducted to ensure the continuing suitability, adequacy and effectiveness of the quality management system.????The review should include assessing opportunities for improvement and the need for changes to the quality management system, including the quality policy and quality objectives.The input to management review should include information on:???? Results of audits,???? Customer feed back,???? Process performance and product conformity,???? Status of preventive and corrective actions,???? Follow-up actions from previous management reviews,???? Changes that could affect the quality management system, and???? Recommendations for improvements.Management reviews should also address the pitfalls to effective implementation, including lack of CEO commitment, failure to involve everyone in the process, and failure to monitor progress and enforce deadlines.Step 12. Pre-assessment AuditWhen system deficiencies are no longer visible, it is normally time to apply for certification. However, before doing so, a pre-assessment audit should be arranged with an independent and qualified auditor. Sometimes certification bodies provide this service for a nominal charge. The pre-assessment audit would provide a degree of confidence for formally going ahead with an application for certification.Step 13. Certification and RegistrationOnce the quality management system has been in operation for a few months and has stabilized, a formal application for certification could be made to a selected certification agency. The certification agency first carries out an audit of the documents (referred to as an “adequacy audit”). If the documents conform to the requirements of the quality standard, then on-site audit is carried out. If the certification body finds the system to be working satisfactorily, it awards the organization a certificate, generallyfor a period of three years. During this three-year period, it will carry out periodic surveillance audits to ensure that the system is continuing to operate satisfactorily.Step 14: Continual ImprovementCertification to ISO 9000 should not be an end. You should continually seek to improve the effectiveness and suitability of the quality management system through the use of:???? Quality policy???? Quality objectives???? Audit results???? Analysis of data???? Corrective and preventive actions???? Management reviewISO 9004:2008 provides a methodology for continual improvement.