Implement Quality Management System

Implement Quality Management System

Implementation of ISO 9000 affects the entire organization right from the start. If pursued with total dedication, it results in 'cultural transition' to an atmosphere of continuous improvement.
The process of implementing ISO 9000 depends on:
􀂃 a. The sophistication of your existing quality program,
􀂃 b. The size of your organization, and
􀂃 c. The complexity of your process.

The 14 essential steps, briefly described below, are to be followed through in order to implement ISO 9000 quality management system successfully.
Step 1: Top management commitment
Step 2: Establish implementation team
Step 3. Start ISO 9000 awareness programs
Step 4: Provide Training
Step 5. Conduct initial status survey
Step 6: Create a documented implementation plan
Step 7. Develop quality management system documentation
Step 8: Document control
Step 9. Implementation
Step 10. Internal quality audit
Step 11. Management review
Step 12. Pre-assessment audit
Step 13. Certification and registration
Step 14: Continual Improvement

How Quality Management System is implemented?

How Quality Management System is implemented?

The terms ‘establish’, ‘document’, ‘implement’, ‘maintain’ and ‘improve’ are used in the ISO 9000 Standard as though this is a sequence of activities when in reality, in order to establish a system it has to be put in place and putting a system in place requires two separate actions:
- Design the Quality Management System using a process that transforms the system requirements into specific characteristics that results in a clear definition of all the processes that meet the system requirements.
- Construct the system using a process that documents, installs, commissions and integrates the processes to deliver the required business outputs.
The way in which these phases of quality system development are related is
illustrated in the management system process model shown in Figure 4.1. This diagram has some important features. Note that the design input to the system comprises internal and external requirements. On the right side there are four improvement routes:
- Improvements in conformity during operation of the system arise through
enforcing policy and practices – doing what you say you do
- Improvements in conformity during system construction arise through
enforcing policy and design rules on the system – reworking the system to
comply with the established policies and objectives
- Improvements in efficiency during system construction arise through
finding better ways of implementing the system design – shorter, less
wasteful routines, less complexity, lower skill levels, fewer resources
- Improvements in effectiveness arise as a result of identifying different
policies and objectives – higher targets, new objectives, new requirements,
regulations, and new technologies.
As indicated above, establishing a system means designing and constructing it, which can be referred to as system development. System design is dealt with under Identifying processes. Constructing the system covers documentation, resourcing, installation, commissioning, qualification and integration.

Continual improvement in the quality management system

Continual Improvement In The Quality Management System

The ISO 9001 standard requires the organization to continually improve the effectiveness of the quality management system in accordance with the requirements of ISO 9001 and to implement action necessary to achieve planned results and continual improvement of the identified processes.

ISO 9000 defines continual improvement as a recurring activity to increase the ability to fulfil requirements. As the organization’s objectives are its requirements, continually improving the effectiveness of the quality management system means continually increasing the ability of the organization to fulfil its objectives.

If the performance of a process parameter is currently meeting the standard that has been established, there are several improvement actions you can take:

Raise the standard e.g. if the norm for the sales ratio of orders won to all orders bid is 60%, an improvement programme could be developed for raising the standard to 75% or higher

Increase efficiency e.g. if the time to process an order is within limits, identify and eliminate wasted resources

Increase effectiveness e.g. if you bid against all customer requests, by only bidding for those you know you can win you improve your hit rate

You can call all these actions improvement actions because they clearly improve performance. However, we need to distinguish between being better at what we do now and doing new things. Some may argue that improving efficiency is being better at what we do now, and so it is – but if in order to improve efficiency we have to be innovative we are truly reaching new standards. Forty years ago, supervisors in industry would cut an eraser in half in the name of efficiency rather than hand out two erasers. Clearly this was a lack of trust disguised as efficiency improvement and it had quite the opposite effect. In fact they were not only increasing waste but also creating a hostile environment.

Each of the improvement actions is dealt with later in the book and the subject of continual improvement addressed again under Quality planning.

There are several steps to undertaking continual improvement:

1. Determine current performance

2 Establish the need for change

3 Obtain commitment and define the improvement objectives

4 Organize diagnostic resources

5 Carry out research and analysis to discover the cause of current performance

6 Define and test solutions that will accomplish the improvement objectives

7 Product improvement plans which specify how and by whom the changes will be implemented

8 Identify and overcome any resistance to change

9 Implement the change

10 Put in place controls to hold new levels of performance and repeat step one

For more information, please visit http://www.iso9001-standard.us

Scope Of The Quality Management System

Scope Of The Quality Management System

The ISO 9001 standard requires the quality manual to include the scope of the quality management system including details of justification for any exclusion. The standard addresses activities that may not be relevant or applicable to an organization. The permissible exclusions are explained in section 1.2 of ISO 9001. Here it states that the organization may only exclude requirements that neither affect the organization’s ability, nor its responsibility to provide product that meets customer and applicable regulatory requirements. The requirements for which exclusion is permitted are limited to those in section 7 of the standard.

Under ISO 9001:2008, it was possible for organizations to exclude functions and processes of their organization that may have been difficult to control or were not part of the order fulfilment cycle. Organizations that designed their own products but not for specific customers could escape bringing these operations into the management system. Marketing was omitted because it operated before placement of order. Accounting, Administration, Maintenance, Publicity, Public Relations and After Sales Support functions were often omitted because there were no requirements in the standard that specifically dealt with such activities. As there is no function in an organization that does not directly or indirectly serve the satisfaction of interested parties, it is unlikely that any function or process will now be excluded from the quality management system.

It is sensible to describe the scope of the quality management system so as to ensure effective communication. The scope of the quality management system is one area that generates a lot of misunderstanding particularly when dealing with auditors, consultants and customers. When you claim you have a management system that meets ISO 9001 it could imply that you design, develop, install and service the products you supply, when in fact you may only be a distributor. Why you need to justify specific exclusions is uncertain because it is more practical to justify inclusions.

The scope of the quality management system is the scope of the organization. There is no longer any reason to exclude locations, activities, functions or processes for which there is no requirement in the standard. The reason is because the ISO 9000 family now serves customer satisfaction and is not limited to quality assurance as were the 1994 versions of ISO 9001, ISO 9002 and ISO 9003.

It is not appropriate to address exclusions by inserting pages in the manual corresponding to the sections of the standard and adding justification if not within the scope of the management system – such as ‘We don’t do this!’.

It is much more appropriate to use an appendix as indicated previously in the manual contents list. By describing the nature of the business, you are establishing boundary conditions. If in doing so you do not mention that you design products, it will be interpreted that design is not applicable.

For exclusions relative to detail requirements, the Compliance Matrix may suffice but for an unambiguous solution, it is preferable to produce an exposition that addresses each requirement of the standard.

Quality Assurance in ISO 9001 Standards

Quality Assurance in ISO 9001 Standards

The adoption of a quality management system should be a strategic decision of an organization. The design and implementation of an organization’s quality management system is influenced by— its business environment, changes in that environment, or risks associated with that environment,— its varying needs,— its particular objectives,— the products it provides,— the processes it employs,— its size and organizational structure.It is not the intent of this International Standard to imply uniformity in the structure of quality management systems or uniformity of documentation.The quality management system requirements specified in this International Standard are complementary to requirements for products. Information marked “NOTE” is for guidance in understanding or clarifying theassociated requirement.This International Standard can be used by internal and external parties, including certification bodies, to assess the organization’s ability to meet customer, statutory and regulatory requirements applicable to theproduct, and the organization’s own requirements.The quality management principles stated in ISO 9000 and ISO 9004 have been taken into consideration during the development of this International Standard.

ISO 9001 – Compatibility with other management systems

ISO 9001 – Compatibility with other management systems
ISO 9001 and ISO 9004 are quality management system standards which have been designed to complement each other, but can also be used independently.ISO 9001 specifies requirements for a quality management system that can be used for internal application by organizations, for certification, or for contractual purposes. It focuses on the effectiveness of the qualitymanagement system in meeting customer requirements.ISO 9004 gives guidance on a wider range of objectives of a quality management system than does ISO 9001, particularly for the continual improvement of an organizations overall performance and efficiency, as well as its effectiveness. ISO 9004 is recommended as a guide for organizations whose top management wishes to move beyond the requirements of ISO 9001, in pursuit of continual improvement of performance. However, it is not intended for certification or for contractual purposes.
During the development of this International Standard, due consideration was given to the provisions of ISO 14001:2004 to enhance the compatibility of the two standards for the benefit of the user community.This International Standard does not include requirements specific to other management systems, such as those particular to environmental management, occupational health and safety management, financialmanagement or risk management. However, this International Standard enables an organization to align or integrate its own quality management system with related management system requirements. It is possible foran organization to adapt its existing management system(s) in order to establish a quality management system that complies with the requirements of this International Standard.

ISO 9001:2008 Requirements – Resource Management

ISO 9001:2008 Requirements – Resource Management
6.1 Provision of ResourcesDetermine and provide the resources necessary to:? Implement and maintain the quality management system? Continually improve the effectiveness of the system? Enhance customer satisfaction by meeting customer requirements6.2 Human Resources6.2.1 GeneralEnsure people performing work affecting conformity to product requirements are competent based on the appropriate education, training, skills, and experience.NOTE: Conformity to product requirements can be affected directly, or indirectly, by personnel performing any task within the quality management system.6.2.2 Competence, Training, and AwarenessThe organization must:? Determine the competency needs for personnel? Provide training (or take other actions) to achieve the necessary competence? Evaluate the effectiveness of the actions taken? Inform employees of the relevance and importance of their activities? Ensure they know their contribution to achieving quality objectives? Maintain education, training, skill, and experience records
6.3 Infrastructure Determine, provide, and maintain the necessary infrastructure to achieve product conformity. Infrastructure includes, as applicable:? Buildings, workspace, and associated utilities? Process equipment (both hardware and software)? Supporting services (such as transport, communication, or information systems)6.4 Work EnvironmentDetermine and manage the work environment needed to achieve product conformity.NOTE: The term “work environment” relates to those conditions under which work is performed, including physical, environmental, and other factors such as noise, temperature, humidity, lighting, or weather.

ISO 9001:2008 General Requirements

ISO 9001:2008 General Requirements

4.1 General requirements
The organization shall establish, document, implement and maintain a quality management system and continually improve its effectiveness in accordance with the requirements of this International Standards. The organization
shall determine the processes needed for the quality management system and their application throughout the organizations,
determine the sequence and interaction of these processes,
determine criteria and methods needed to ensure that both the operation and control of these processes are effective,
ensure the availability of resources and information necessary to support the operation and monitoring of these processes,
monitor, measure (where applicable) and analyze these processes, and
implement actions necessary to achieve planned results and continual improvement of these processes.
These processes shall be managed by the organization in accordance with the requirements of this International Standard.
Where an organization chooses to outsource any process that affects product conformity to requirements, the organization shall ensure control over such processes. The type and extent of control to be applied to these outsourced processes shall be defined within the quality management system.
NOTE 1: Processes needed for the quality management system referred to above include processes for management activities, provision of resources, product realization and measurement, analysis and improvement.
NOTE 2: An outsourced process is identified as one being needed for the organization’s quality management system, but chosen to be performed by a party external to the organization.
NOTE 3: Ensuring control over outsourced processes does not absolve the organization of the responsibility of conformity to all customer, statutory, and regulatory requirements. The type and extent of control to be applied to the outsourced process can be influenced by factors such asa) the potential impact of the outsourced process on the organization’s capability to provide product that conforms to requirements,b) the degree to which the control for the process is shared;c) the capability of achieving the necessary control through the application of clause 7.4.
Clause 4.2 Documentation requirements
4.2.1 General
The quality management system documentation shall includedocumented statements of a quality policy and quality objectives,
a quality manual,
documented procedures and records required by this International Standard,
documents including records, needed determined by the organization to be necessary to ensure the effective planning, operation and control of its processes
NOTE 1: Where the term “documented procedure” appears within this International Standard, this means that the procedure is established, documented, implemented and maintained. A single document may include the requirements for one or more procedures. A requirement for a documented procedure may be covered by more than one document.
NOTE 2: The extent of the quality management system documentation can differ from one organization to another due to the size of organization and type of activities, the complexity of processes and their interactions, and the competence of personnel.
NOTE 3: The documentation can be in any form or type of medium.
4.2.2 Quality Manual
The organization shall establish and maintain a quality manual that includes the scope of the quality management system, including details of and justification for any exclusions (see 1.2), the documented procedures established for the quality management system, or reference to them, and a description of the interaction between the processes of the quality management.
4.2.3 Control of documents
Documents required by the quality management system shall be controlled. Records are a special type of document and shall be controlled according to the requirements given in 4.2.4.
A documented procedure shall be established to define the controls needed
to approve documents for adequacy prior to issue,
to review and update as necessary and re-approve documents,
to ensure that the changes and the current revision status of documents are identified,
to ensure that relevant versions of applicable documents are available at points of use,
to ensure that documents of external origin are identified and their distribution controlled, and
to prevent the unintended use of obsolete documents, and to apply suitable identification to them if they are retained for any purpose.
4.2.4 Control of records
Records established to provide evidence of conformity to requirements and of the effective operation of the quality management system shall be controlled. The organization shall establish a documented procedure to define the controls needed for the identification, storage, protection, retrieval, retention, and disposition of records. Records shall remain legible, readily identifiable, and retrievable.

Continual improvement in the quality management In ISO 9001

Continual improvement in the quality management system and its processes In ISO 9001
The standard requires the organization to continually improve the effectiveness of the quality management system in accordance with the requirements of ISO 9001 and to implement action necessary to achieve planned results andcontinual improvement of the identified processes.
ISO 9000 defines continual improvement as a recurring activity to increase the ability to fulfil requirements. As the organization’s objectives are its requirements, continually improving the effectiveness of the management system means continually increasing the ability of the organization to fulfil its objectives.
This requirement responds to the Continual Improvement principle. If the management system is enabling the organization to accomplish its objectives when that is its purpose, why improve? The need for improvement arises out of a need to become more effective at what you do, more efficient in the utilization of resources so that the organization becomes best in its class. The purpose of measuring process performance is to establish whether or not the objectives are being achieved and if not to take action on the difference. If the performance targets are being achieved, opportunities may well exist to raise standards and increase efficiency and effectiveness.
If the performance of a process parameter is currently meeting the standard that has been established, there are several improvement actions you can take:Raise the standard e.g. if the norm for the sales ratio of orders won to all orders bid is 60%, an improvement programme could be developed for raising the standard to 75% or higherIncrease efficiency e.g. if the time to process an order is within limits, identify and eliminate wasted resources Increase effectiveness e.g. if you bid against all customer requests, by only bidding for those you know you can win you improve your hit rate
You can call all these actions improvement actions because they clearly improve performance. However, we need to distinguish between being better at what we do now and doing new things. Some may argue that improving efficiency is being better at what we do now, and so it is – but if in order to improve efficiency we have to be innovative we are truly reaching new standards. Forty years ago, supervisors in industry would cut an eraser in half in the name of efficiency rather than hand out two erasers. Clearly this was a lack of trust disguised as efficiency improvement and it had quite the opposite effect. In fact they were not only increasing waste but also creating a hostile environment.
Each of the improvement actions is dealt with later in the book and the subject of continual improvement addressed again under Quality planning in Chapter 5. There are several steps to undertaking continual improvement (Juran, J. M., 1995)12 .1 Determine current performance2 Establish the need for change3 Obtain commitment and define the improvement objectives4 Organize diagnostic resources5 Carry out research and analysis to discover the cause of currentperformance6 Define and test solutions that will accomplish the improvementobjectives7 Product improvement plans which specify how and by whom the changeswill be implemented8 Identify and overcome any resistance to change9 Implement the change10 Put in place controls to hold new levels of performance and repeat step one.